This is an AI translated post.
Sanyo Supply launches new docking station integrated monitor arms
- Writing language: Korean
- •
-
Base country: Japan
- •
- Information Technology
0000-00-00 00:00:00
Select Language
Summarized by durumis AI
- Sanyo Supply released two gas-pressure monitor arms with a docking station base on June 4th.
- The single-screen "CR-LACDK1402BK" is priced at 39,600 yen, while the dual-screen "CR-LACDK2402BK" is priced at 57,200 yen and features various ports such as HDMI, wired LAN, and USB.
- It supports liquid crystal displays up to 32 inches and 10 kg, and supports clamp and grommet installation for ceiling installation.
Sanwa Supply Co., Ltd. has released two gas-spring monitor arms with a docking station as the base on June 4th. The single-screen "CR-LACDK1402BK" retails for 39,600 yen, while the dual-screen "CR-LACDK2402BK" is priced at 57,200 yen.
Connection to the PC is via USB Type-C. The docking station section features HDMI, wired LAN ports, and other ports that require constant connection on the left and right sides. Ports that are frequently detached, such as USB, are located on the front. The HDMI port has 1 on the CR-LACDK1402BK and 2 on the CR-LACDK2402BK. When outputting to 1 device, it supports video output up to 4K/60Hz. The CR-LACDK2402BK supports 4K/30Hz when outputting to 2 devices.
In addition to HDMI, it is equipped with various interfaces such as 3 USB Type-A, 1 USB Type-C (supports up to 100W USB PD), 1 wired LAN (supports Gigabit), 1 HDMI (supports 4K/60Hz output), 1 SD card slot, 1 microSD card slot, and 1 3.5mm headphone jack. USB data transmission supports USB 3.2 Gen 1, and the USB Type-C port can supply power to a PC connected via an AC adapter.
Clamp-type (supports 20-50mm desk plates) and grommet-type desk plate installations are supported. Smooth adjustment is possible with the gas spring, and the monitor can be adjusted 90° upward, 45° downward, 180° left and right, and 360° rotated. The monitor installation area complies with VESA standard (75×75mm, 100×100mm) and supports liquid crystal displays up to 32 inches and 10kg per arm. The main unit weight is approximately 2.85kg for the CR-LACDK1402BK and approximately 5.15kg for the CR-LACDK2402BK.
